Bones Reds Skateboard Bearings 8 Pack - Skate Rated Speed For Daily Street Sessions

Bones Reds Skateboard Bearings 8 Pack is one of the most recognizable hardware upgrades in modern skateboarding, combining Skate Rated engineering with an accessible $24.95 price for street, park and bowl setups in the United States.

Skate Rated Design And Core Specs

The Bones Reds Skateboard Bearings 8 Pack is built around standard 608 sizing, with each bearing measuring 22 mm outer diameter, 8 mm inner diameter and 7 mm width to fit typical skateboard and longboard wheels.Technical sizing information from a US skate retailer The set includes eight bearings, enough for one complete skateboard, and ships as a compact pack with a red shield design that visually marks the Reds line.Manufacturer contents and design details

Inside each Bones Reds bearing are chromium steel balls and races, selected for durability under the repeated impact loads that street and park skateboarding generate.Material and construction overview from a skate shop A removable high speed nylon ball retainer holds the balls in place, balancing strength with reduced friction at skate speeds so the wheels can spin longer between pushes.Editorial review describing the nylon ball retainer and Skate Rated tolerances

Each bearing carries a single non-contact removable rubber shield that keeps dust and street grit away from the balls while avoiding the drag of a fully sealed design.Shield and feature list on the manufacturer page Bones lubricates the bearings at the factory with its Speed Cream racing lubricant, so out of the box they deliver a fast roll with minimal break-in on new setups.Pre-lubrication details from a retailer listing

Manufacturing Origin, Brand And US Entity

Bones Reds bearings are manufactured in China to Bones Skate Rated specifications, in a facility dedicated to producing high quality skate bearings under the brand’s tolerances and quality controls.Manufacturer statement on origin and quality control The design, testing and quality criteria are led by Bones in the United States, with the Reds line positioned as the entry level Skate Rated bearing compared with the Swiss line made in Switzerland.Technical guide comparing Swiss and Reds categories

Bones Bearings was started in the early 1980s by George Powell and is part of the Skate One group alongside Powell, Bones Wheels, Mini Logo, Surf One and Positiv, tying the hardware line into a long running skate brand ecosystem.History of Bones Bearings within Skate One For US customers, Bones Bearings lists its business address as 6860 Cortona Drive Unit B, Goleta, CA 93117, with customer service contacts and an authorized dealer network for domestic distribution.Skate Rated information and US contact address

Package Contents And Everyday Use

The Bones Reds Skateboard Bearings 8 Pack ships with eight bearings, a simple set of instructions and a Bones sticker, providing everything needed for a single skateboard wheel assembly without additional small hardware in the box.Contents list on the manufacturer product page Retailers highlight the semi-sealed configuration with a removable rubber shield, which makes it straightforward for skaters to pop the shield off, clean the bearing and reapply Speed Cream or another compatible lubricant when the spin begins to slow.Retail description of shield and cleaning process

Because the bearings use standard 608 dimensions with an 8 mm axle diameter, they drop into most modern skateboard and longboard wheels without modification, simplifying setup for new decks or wheel swaps.Compatibility notes for standard 608 sizing Skaters and editors describe Reds as delivering a smooth, fast roll straight from the box, with minimal break-in and consistent performance during repeated pop tricks and quick carves on transition.Review summary highlighting roll and break-in behavior

Price Point And Value In The Bearing Lineup

In the US market, Bones Reds bearings are widely sold at $24.95 for the 8 pack, a price that positions them as a mid-range upgrade over generic bearings while staying well below the cost of premium Swiss or ceramic models.US price listing for Bones Reds bearings Guides to the Bones lineup underline that Reds are the entry level bearing within the brand’s catalog but remain one of the best selling skateboard bearings because they balance speed, durability and that sub-$25 price.Guide explaining Reds price and lineup position

For skaters comparing Reds with higher tier Bones bearings, the standard Reds 8 pack sits below the Bones Big Balls Reds at $29.95, which use six balls that are 17 percent larger for higher top speed and longer life.Price and feature list for Big Balls Reds It also tracks far below Bones Ceramic Reds at $79.95, which incorporate grade 5 silicone nitride ceramic balls for lower friction, faster acceleration and self-polishing behavior when dirt enters the bearing.Manufacturer page with price and ceramic ball specs

Editorial comparisons frequently frame Reds as a benchmark mid-range bearing: they may not reach the peak top speed of Swiss or ceramic models in long downhill runs, but they offer reliable performance out of the box and affordable replacement when a bearing eventually blows or seizes after months of heavy street use.Review verdict on Reds as a mid-range benchmark For many progressing skaters in the US, that combination of Skate Rated tolerances, straightforward maintenance and a $24.95 pack price makes Reds a common choice for first serious hardware upgrades beyond completes assembled with generic bearings.

Placement In The Skate Hardware Landscape

Within the broader skate hardware landscape, Bones Reds occupy a role as a dependable default choice when a skater wants a noticeable improvement over no-name bearings without committing to the higher cost and specialized feel of Swiss or ceramic sets.Guide describing Reds as entry level Bones bearings The Skate Rated philosophy shifts the focus away from traditional ABEC ratings toward tolerances, lubrication and clearances tuned for impact loads and side forces that typical precision bearings do not prioritize.Technical explanation of Skate Rated design

For US street and park skaters assembling their own setups, Reds provide a consistent baseline feel and are easy to source through authorized dealers and core shops that carry Bones hardware alongside compatible wheels and trucks.Dealer lookup tool for US Bones Bearings stockists Skaters pushing into more speed focused disciplines such as downhill or tech-heavy freestyle may look at Big Balls Reds, Super Reds or Ceramic Reds for additional performance, but Reds generally remain the reference point against which those upgrades are measured.

Use Case Verdict For US Skaters

For US skaters building or refreshing a street or park deck, Bones Reds Skateboard Bearings 8 Pack offers an appealing mix of Skate Rated engineering, straightforward maintenance and a widely available $24.95 price that makes a full bearing swap a realistic, repeatable upgrade.US pricing and positioning for Reds bearings Compared with Big Balls Reds at $29.95 and Ceramic Reds at $79.95, Reds sit comfortably as a value-focused option for skaters who prioritize solid performance over absolute top speed or exotic materials.Price comparison with Big Balls Reds bearingsPrice and construction overview for Ceramic Reds bearings

Reds will not replace highly specialized downhill setups tuned around Swiss or ceramic bearings, but for everyday local park sessions, curb cuts and DIY ledges they hit a practical sweet spot: easy to clean, designed for skate impacts and side loads, and inexpensive enough that a worn or damaged bearing can be swapped without turning the hardware bill into a major expense.