DeWalt DCF887D2 20V MAX XR Impact Driver Kit - Compact Power With 205 Nm Torque

DeWalt DCF887D2 20V MAX XR 3-speed 1/4 in impact driver kit is built around the compact DCF887 brushless driver and packaged with two 20V MAX XR 2.0 Ah lithium-ion batteries, a charger and a hard storage case for jobsite portability and controlled fastening in tight spaces.Toolguyd notes the kit options and core specs.

Brushless Driver And Kit Contents

At the heart of the DCF887D2 kit is the DeWalt DCF887 20V MAX XR brushless impact driver, which uses a 1/4 in hex chuck and three electronic speed modes to balance power and control across different fastening tasks.Official technical data lists the 1/4 in tool holder and three speed ranges.

The DCF887 motor is brushless, with a rated power output of 400 W and a nominal battery voltage of 18 V, driven by DeWalt 20V MAX slide-on lithium-ion packs.The technical sheet specifies 18 V DC, 400 W power and Li-ion chemistry. In the DCF887D2 configuration, the impact driver is paired with two 20V MAX XR 2.0 Ah batteries, a compact charger and a plastic hard case, creating a complete kit ready for professional and serious DIY use.A Calfast listing details the DCF887D2 kit contents: driver, two 2.0 Ah packs, charger, belt hook and case.

Performance, Speed Modes And Dimensions

On performance, the DCF887 impact driver used in the DCF887D2 kit delivers up to 205 Nm of torque, with three selectable speed ranges: Mode 1 at 0-1000 rpm, Mode 2 at 0-2800 rpm and Mode 3 at 0-3250 rpm.The manufacturer technical data lists 205 Nm max torque with 0-1000/2800/3250 rpm. The impact mechanism reaches up to 3800 impacts per minute, helping drive large fasteners quickly in wood and metal.A DeWalt UK product page for the DCF887D2 design confirms 205 Nm torque and 3800 impacts per minute.

Despite the high torque, the DCF887 remains compact, with a length of about 5.3 in and a bare-tool weight of roughly 0.9 kg, making it easier to maneuver in tight framing cavities and cabinetry.Toolguyd describes the new impact driver as about 5.3 in long and compactDeWalt notes a 135 mm length and 0.9 kg bare-tool weight for the DCF887. A ring of three LEDs around the chuck provides workpiece lighting, and a quick "drop and load" bit holder enables one-handed bit changes, details that improve day-to-day usability when driving large numbers of fasteners.The 18V XR impact driver specification highlights the LED ring and drop-and-load bit holder.

Kit Positioning, Warranty And Price

Within DeWalt's 20V MAX XR ecosystem, the DCF887D2 kit is positioned as a mid-capacity package, supplying two compact 2.0 Ah batteries rather than the larger 4.0 Ah packs found in the DCF887M2 kit, which reduces weight and cost while still covering typical framing, decking and remodel tasks.Toolguyd outlines three bundles: DCF887B (bare), DCF887D2 with 2.0 Ah packs and DCF887M2 with 4.0 Ah packs. A Canadian Tire listing for the DCF887D2 configuration documents that the kit includes two batteries, charger, bag or case and clips, with a maximum torque listed at 151 ft-lb (about 205 Nm) and a no-load speed up to 3250 rpm, consistent with DeWalt's technical data.Canadian Tire lists the DCF887D2 kit parts, torque in ft-lb and speed range.

The DCF887D2 kit carries DeWalt's typical warranty package for the DCF887 series, with a 3-year limited warranty, 1 year of free service and a 90-day money-back guarantee when purchased as an XR kit.A Calfast listing describes a 3-year limited warranty, 1-year free service and 90-day money-back guarantee for DCF887 kits. For pricing, a dedicated power tool store lists the DeWalt DCF887D2 20V MAX XR 3-speed 1/4 in impact driver kit at $219.00, providing a clear reference point for US buyers.Power Bolt and Tool prices the DCF887D2 kit at $219.00.

Comparison With DCF887M2 And Bare-Tool Options

Compared with the DCF887M2 kit, which combines the same DCF887 impact driver with two 4.0 Ah batteries and is listed at $349.00 at a major US home improvement retailer, the DCF887D2 trades runtime and total energy capacity for a significantly lower kit price and lighter battery packs.Home Depot lists the DCF887M2 kit with two 4.0 Ah batteries at $349.00. Toolguyd notes that the DCF887B bare tool option launched at about $117, while the compact-battery DCF887D2 kit was expected around $192 and the high-capacity DCF887M2 kit around $215, reflecting the cost difference associated with battery size and included accessories.Toolguyd discussed approximate launch pricing for DCF887B, DCF887D2 and DCF887M2 bundles.

In practice, buyers already invested in DeWalt's 20V MAX platform may opt for the DCF887B bare tool or newer drivers, leveraging existing batteries for lower upfront cost, while users seeking a dedicated impact driver kit with enough runtime for structural fastening and deck installation will find the DCF887D2 package a balanced choice thanks to its two 2.0 Ah packs, compact tool size and mid-range price relative to higher-capacity bundles.

Use Case And Category Placement

Within the category of cordless impact drivers, the DeWalt DCF887D2 kit stands out as a compact, high-torque package suitable for framing crews, remodelers and DIY users who regularly drive structural screws, lag fasteners and deck hardware and prefer a lighter battery kit over maximum runtime.The 205 Nm torque and 3800 ipm rating support heavy-duty fastening. For extended all-day fastening or mixed drilling and fastening needs, the heavier DCF887M2 kit or newer 20V MAX XR drivers with larger batteries will better match high-volume work, while the DCF887D2 remains a solid mid-tier kit that balances size, cost and capability for many users.