Element Section 7.75 Complete Skateboard - Street Ready Maple Deck For Technical Tricks

The Element Section 7.75 Complete Skateboard puts a classic 7.75 inch street deck and full hardware setup into one package so skaters can roll straight from the shop to the skatepark. Built around a 31.25 inch popsicle deck made from seven-ply maple, it targets riders who want enough board underfoot for technical tricks without feeling sluggish or bulky.

Deck Geometry And Construction

At the core of the Section complete is a 7.75 inch wide deck paired with a 31.25 inch length and a 14 inch wheelbase, a geometry that sits squarely in the modern street skateboard sweet spot.SkatePro lists the 7.75 inch option at 31.25 inches long with a 14 inch wheelbase. The deck uses a seven-ply maple construction with a double kicktail and low concave for flip tricks and ollies while still giving enough stability for ledge and flat-ground work.The same specification table notes Canadian maple and a double kicktail with low concave.

Element offers the Section geometry in several widths, but the 7.75 inch version is aimed at skaters who favor technical street skating and want a board that flicks quickly.Vu Skateboard Shop lists the 7.75 inch size at 31.25 inches long with a nose around 6.85 inches and tail around 6.2 inches. That nose and tail length keep the board responsive for nollies and switch tricks while maintaining enough surface area for solid landings.

Hardware Setup And Ride Feel

Out of the box, the Section 7.75 complete is ready to ride with trucks, wheels, bearings and grip already installed. For its hardware, Element pairs the 7.75 inch deck with standard kingpin trucks and small, hard wheels designed for street surfaces.SkatePro specifies 50 mm 98A wheels mounted on standard kingpin trucks with a 7.75 inch axle width. This combination favors technical skating on smooth concrete, making it easier to lock into ledge grinds and control slides.

Element’s own specification for the Section 7.75 complete emphasizes a slightly larger wheel size and a higher durometer for all-round park and street use.Element lists 52 mm 99A white wheels with a graphic paired with raw Element trucks using 90A white bushings. The trucks use a 5.0 inch hanger size, and the complete comes with ABEC 5 bearings for smoother roll, along with 7/8 inch hex bolts, standard grip and a heat-transfer bottom graphic.

The board’s overall heft sits in a manageable range for most street skaters.SkatePro lists the complete at 74.82 oz with a maximum rider weight of 220 lb. That capacity accommodates most teen and adult riders while the weight keeps the setup light enough for flip tricks without feeling flimsy.

Price Positioning In The Skateboard Market

In the US market, the Section 7.75 complete sits as a mid-range street skateboard with pricing below many pro-model setups but above entry-level big-box completes.Vu Skateboard Shop lists the Element Section complete at $100.00 for the series, including the 7.75 inch size. A separate listing focused on the 7.75 inch setup shows the complete priced just under the hundred-dollar mark in another US context.SkateFlux carries the Element Section 7.75 complete at $99.50. Taken together, these prices place the board around $99.50-$100.00 in US skate shops as of 09/18/2026.

This price band reflects the use of branded components and seven-ply maple rather than cheaper hardware and softer wood often found in lower-cost completes. It also positions the Section 7.75 against alternative completes in the same category that use similar deck sizes but may opt for different wheel and truck combinations, giving shoppers a clear midpoint between budget shop completes and full custom builds.

Comparison With Other Street Completes

Within Element’s own lineup, the Section 7.75 complete competes with wider options like 8.0 and 8.25 inch boards that cater more to transition and ramp skaters.Vu Skateboard Shop’s sizing chart shows the Section series available in 7.5, 7.75, 8.0 and 8.25 inch widths. Compared with the 8.0 inch size, the 7.75 inch deck trims a quarter inch of width while keeping the wheelbase at roughly 14 inches, which tends to make flip tricks and rotations slightly quicker at the cost of a bit of stability on big landings.

Against a typical beginner-oriented shop complete, the Section 7.75 uses harder wheels and a more refined geometry. While many entry-level completes in mass retail use softer wheels that smooth out rough pavement, the 98A-99A hardness specified for the Section emphasizes performance on smooth skatepark concrete.SkatePro’s spec sheet compares the 50 mm 98A wheels and ABEC-3 bearings on the Section complete to other street setups, indicating a focus on predictable slide and speed over pure comfort.

Use Case And Who It Suits

Element positions the Section complete as an all-purpose street and park board that can carry beginners through their first tricks while still serving intermediate riders who want a reliable setup.Element describes the Section line as built with high-grade materials for a street-ready smooth ride suitable for skaters of all skill sets, including beginners. The 220 lb rider weight limit and mid-size 7.75 inch width offer enough margin for most adult skaters while catering to feet sizes that prefer a more nimble deck for flip tricks.

For a skater choosing between widths, the Section 7.75 complete makes the most sense for those who prioritize technical street skating, flat-ground tricks and moderate ledge work on smooth surfaces. Riders who spend more time on bowls or larger transition might prefer the 8.0 or 8.25 inch versions of the same board to gain additional stability and platform width, but the core geometry and hardware remain closely aligned across the series.